9 Things You Need To Know About Drywall Installation

When you decide on drywall installation project, the first thing you do is checking some local contractors, asking for quotes and hoping to find a good installer. If you do get a good installer to come to your house, the service fee may shock you.

Even though it’s not a rocket-science task, to do the proper drywall installation, taping and finishing is not as easy as you would think. With this in mind if you what to try and hang drywall yourself, there are some things to consider and keep in mind.


For a good results, make sure that framing is done correctly. Twisted or bowed walls studs will result in wavy walls.


Mark all of the framing areas. Knowing location of framing studs will help you with placing the screws correctly and you won’t waste time on removing screws that miss the framing. Use your marks as a guide. Just draw a light pencil line across the drywall sheet to help you to place screws fast and accurately.


Start your drywall installation project by hanging drywall at the ceiling first. Not to mention, this will help you line up your edges and corners of sheetrock easier.


Often people forget trimming the opening for the outlet before attaching the drywall to the framing. That mistake will cause the board to break around the electrical box, requiring extra time to patch. In order that won’t happen you need to carefully measure and cut out the openings in your sheet of drywall and then press it tight to the wall. Trim excess drywall along tight box edges until the drywall slides easily over the outlet boxes and finish fastening it.


Buy a good quality tools and screws with a proper length! Drywall comes in different thickness, consider that before buying screws. Also note, that need to buy a drywall screw gun, not a regular drill. It is a lightweight drill that is designed specifically for setting drywall screws. It has a way to lock the trigger on, so you can set the screws very fast without hurting yourself. Also it has a cone tip that holds the screw in place and sets the depth so that all of the screws are set the same.


To hold drywall in place, you should put screws in a sufficient quantity. The maximum spacing for screws in the ceilings attached to wood studs is 12 inch on center and walls. Screws and nails should be driven approximately 1/32 inch below the surface. Always apply pressure to the board with your hand, just before the screw or nail begins to recess. The board must be tightly pressed against the framing when driving fasteners, so two or three people would be ideal for this job.


The best temperature for drywall installation should be 13 degrees C (55 F) or higher. Drywall will expand or contract when temperature changes. The drywall installed in cold weather will expand 1/2 inch over 100 feet when the temperature rises to 22 degrees C (72 F). So be sure to leave a 1/8 inch gap between sheets to account for this expansion. That also goes for gypsum finishing products as well. If allow drywall finishing materials to freeze before they completely dry, the finish compounds can lose their strength and bonding qualities.

Humidity can also cause expansion of drywall. Drywall can expand 1/2 inch per 100 feet and become wavy. Excessive humidity can also cause drywall on the ceiling to sag. The force of gravity pulls the drywall down and it will contain that bowed shape. And if that happens, it cannot be corrected.


Working area has to be clean before, during, and after the job. Congestion of a mess and dust could hide dangerous objects and result in injury.


Last, but not least – make sure the drywall is properly attached! If not, you will most likely will experience problems at a later stage. The amount of clutter and time that goes into finishing the drywall, shows that you should spend extra time to properly install the panels. Often, people spend a little time installing drywall, thinking that the finisher will cover their mistakes. But they couldn’t be more wrong. Don’t let this happen on your project!

If the above sounds like too much, give us a call today and we will take care of all of that. Call us to get a free estimate and a fair price!

All about Drywall

Let’s talk about the best creation in the construction industry – Drywall. Over the years it evolved to a perfect combination of paper and gypsum. You might’ve heard its other well known names such as plasterboard, sheetrock or gypsum board. Drywall is a great material to work with.

Here are few types of most popular and helpful drywall:

Standard drywall.

First of all in our list is Standard plasterboard. These regular panels can be installed in any room of your house. Standard drywall usually comes in variety of  thicknesses: 1/2 inch, 1/4 inch or 5/8 inch. After a proper and professional drywall installation, you can do any desirable design with various products, including paint, wallpaper or wood paneling.


Moisture resistant or Mold-resistant drywall.

Another most popular gypsum board is Moisture resistant drywall or Greenboard. They are designed to meet safety codes and help to prevent your family home from a harmful to your health mold and usually installed in bathrooms and also basements.

Fire-resistant drywall.

For those, who already started custom home project, know that the city requires to install Fire resistant drywall. For even more protection of your home, it is certainly a necessity to install it in your garage, kitchen and fireplace room.


Finally, almost everyone has noisy neighbors behind the wall, not to mention an annoying street noise which gives your family a headache. In this case, soundproofing is the answer! By soundproofing a desired room or space of your home, you will prevent noise from traveling in and out. As a result you and your family will have many noise-free nights.

There are many types of drywall, we just listed only few of them. To make sure you have a proper installation, we certainly suggest to ask a professional to do that for you. Because by doing that not only you will save yourself some time but money as well. By hiring Royal Drywall, you will see how fast and perfect drywall installation can be. You also won’t buy materials in small quantities and pay the retail price, as we will provide materials by the wholesale price.

Ready to give us a call? Contact Us today for a free quote and a site visit!

Improved Soundproofing Options


To prevent noise from your lovely neighbors and a busy street entering your house or escaping to another room – Soundproofing is the best option.

Do you have a room that needs some special attention for soundproofing or you’re building your house from the scratch and planning which walls, floors and ceilings need to be soundproof? We bet you’re planning on placing wood or steel studs filled with Roxul safe and sound batting, MLV sheeting on the steel studs and double 5/8 drywall with green glue in between. Sounds complicated and expensive. But what if we tell you, that there is a NEW, CHEAPER and EASIER WAY to soundproof. Yes, it exists!


RefleXor, is a thermo-acoustic membrane made from 100% recycled polyester fibres laminated to a metallic film. Its membrane has a thickness of 0.039” and it comes in roll sizes 4’ x 50’. The RefleXor, which is light and easy to handle, offers a continuous and effective sound barrier that will help the soundproofing process.

To install it you will simply need to apply the RefleXor membrane on the first layer of drywall using T50 (or similar) staples leaving a 4” overlap at the floor, at the ceiling and at any other seam, with the gold side facing the inside of the room. Then install the second layer of drywall conventionally, once the gold RefleXor membrane is in place and it’s done, no acoustic sealant is needed! This innovative wall and ceiling system, which combine RefleXor, minimize the complexities of soundproofing while offering superior results.

RefleXor is also a strong vapour barrier with unparalleled soundproofing properties, as well as a barrier against the transmission of odours, carbon monoxide, smoke and the development of mould.

Sounds good to believe and need more information about this magical material, visit http://www.mslfibre.com/Produits/Fiche/4/RefleXor, there you can find more materials how to properly install and order it.

We’ve worked with The RefleXor at our last project and can confidently say, that RefleXor is the perfect solution for any interior wall structure, ceiling, or interior partition for all soundproofing and vapour barrier needs. It is definitely the future of a better and easier soundproofing.

If you are a homeowner and not sure how to handle it by yourself, you can always call or email us and we will provide you with a free of charge quote, and install it for you.